×

Sigma Hellas Ltd contact information

If you still have problems, please let us know, by sending an email. Thank you!

Working Hours

Mon - Fri: 08:00 - 16:00 (EET)
Sat: Closed
Sun: Closed

FORGOT YOUR DETAILS?

Water tanks

Fresh water tanks
Fresh water tanks present onboard may be two or more in numbers, depending upon the size of vessel. They are used to store sanitary water for accommodation, engine room and deck use.

Drinking water tank
A separate drinking water tank may be present to store drinkable water received from shore or to store water produced by fresh water generator (F.W.G).

Distilled Feed water tank
A ship’s boiler needs distilled water to produce steam, and therefore water from fresh water generator (F.W.G) is stored in distilled water tank.

Boiler feed water tank
The boiler feed water system consist of a separate tank which receives water from distilled water tank.

Cascade tank
Cascade tank, also known as hot well, is a part of boiler feed water system. Water is pumped into the cascade tank from the feed water tank. The boiler water is treated in the cascade tank and the return from the steam heating system is also connected to the hot well.

Ballast water tanks
Ballast water tanks are present all over the ship for ballasting and de-ballasting purpose for stabilizing the ship and for acquiring correct draught for port and canal crossing etc. Double bottom tanks are generally located outside the engine room.

Stern tube cooling water tank
This tank is located around the stern tube of the propeller and acts as a cooling media for the same. It can be used as a fresh water water tank of the ship.

Slop tanks
Slop tank in tanker
Slop tanks are present onboard tanker to store oily water mixture from cargo tank washing. The number of slop tanks depends on the Dead weight Tonnage (DWT) of the vessel.
Sludge tank
Located in engine room, this tank is used to store sludge produced after treating fuel or lube oil through purifiers.

Bilge tank
The water and oil leakage in the engine room is collected in bilge wells and this oily water mixture is then transferred to primary bilge tank or bilge holding tank, where the mixture is settled down and then is transferred to secondary bilge tank.

The oily water separator is supplied through secondary or separated bilge tank and a shore connection is also connected to this tank to dispose off all the collected bilge to shore.

Scavenge drain tank
The sludge produced by the main engine in the scavenge area is collected in the small capacity scavenge drain tank.
Oily Water Separator (O.W.S) Sludge tank
When oily water separator operates, it separates oil from water and that oil is collected and discharged into a separate tank known as O.W.S sludge tank.

Other Tanks
Drain tank
The drain tank is located in the engine room. All drip trays and other drains are connected to this tank.

Leak off tank
This is a small tank separately fitted in the main engine and all auxiliary engines to detect any fuel leakage. The tank consists of an orifice and a float. If the leak is very small, it will pass through the orifice; but if leakage increases, the oil will not be able to pass through the orifice and tank level would increase, rising the float and thus giving an alarm

Stuffing Box Tank
The main engine stuffing box scraps the impure lubricating oil, which is collected in a separate tank known as stuffing box tank.

Waste oil tank
The waste oil tank is a separate tank used to collect waste and impure oil produced onboard ship.

Soot collecting tank
When the economiser tube washing is done, the soot water is collected in a soot collecting tank.

Sewage holding tank

The sewage produced from the onboard crew is collected in a common tank known as sewage collecting tank. The sewage plant takes intake from the sewage holding tank.

TOP