Portable Categories
see the categories and sub-categories
- Air Velocity
- Chlorine
- Coating Thickness
- Compressed Air
- Concrete Thickness Meter
- Conductivity
- Crane Scales
- Dissolved Oxygen
- Endoscope
- Flue Gas Analysis
- Flue Gas Leakage
- Flow
- Gas Detection
- HACCP
- Humidity
- Light Intensity
- Multi-Function
- Particles
- PH
- Pressure
- Pyranometer
- Reinforcement Bar Locator
- Sound
- Speed/Rotation
- Temperature
- Thickness
- Turbidity
- Vibrations
- Water Leak Detectors
- Wind Speed
pressure meter 510
differential pressure meter incl. protective cap, batteries and calibration certificate
The differential pressure meter is ideally suitable for pressure measurements in the range 0 to 100 hPa. 510's differential pressure measurement is temperature-compensated for accurate readings. Readings can be displayed in Pascal over the whole measurement range. Magnets at the back of the instrument enable hands-free operation, for instance, while adjusting gas heaters.
- Display in Pascal possible over entire measurement range
- Accuracy: ±0.03 hPa (0 to 0.30 hPa) / ±0.05 hPa (0.31 to 1.00 hPa)
- Temperature compensation
- Magnetic rear permits free-hand work
- Flow velocity measurement with Pitot tube (Pitot tube not included in delivery)
- Air density compensation
- Protective cap for safe storage
- Including wrist strap and belt holder
- Backlit display
- Switchable units: hPa, mbar, Pa mmH2O, mmHg, inH2O, inHg, psi, m/s, fpm
Technical Data
Storage temperature -40 to +70 °C
Operating temperature 0 to +50 °C
Battery type 2 batteries Type AAA
Battery life 50 h
Weight 90 g
Dimensions 119 x 46 x 25 mm
Probe type Differential pressure
Meas. Range 0 to 100 hPa
Accuracy ±0.03 hPa (0 to 0.30 hPa)
±0.05 hPa (0.31 to 1.00 hPa)
±(0.1 hPa + 1.5 %of mv) (1.01 to 100 hPa)
Resolution 0.01 hPa
pressure meter 511
absolute pressure meter incl. protective cap, batteries and calibration certiificate
- Measures absolute pressure, e.g. for absolute pressure compensation in flow velocity measurements with a Pitot tube
- Calculation of barometric air pressure * Barometric altitude measurement
- Accuracy +/-1.2"H20
- Protective cap for safe storage
- Including wrist strap and belt clip
Technical Data Storage temperature -40 to +70 °C
Operating temperature 0 to +50 °C
Battery type 2 batteries Type AAA
Battery life 200 hr
Dimensions 119 x 46 x 25 mm Probe type Absolute pressure probe
Meas. Range ±0.01 inH2O
Accuracy 120.4 to 481.8 inH2O
Resolution ±1.2 inH2O
pressure meter 512 - differential pressure meter, incl. battery and calibration document
Model 512 provides simultaneous pressure and flow measurements in one compact, versatile instrument. It offers two user-switchable units of flow: feet per minute (fpm) and meters per second (m/s). Eight different units of pressure can be selected: psi, inches H20, inches Hg, kPa, hPa, Pa, mH20 and mHg. All readings are clearly visible on a large backlit display. The versatile model 512 provides smoothing between 1 and 20 display refreshes (0.5 sec) yielding a sliding mean reading. Density compensation is built-in. A separate HOLD-MIN-MAX button freezes readings and displays both flow and pressure extremes. Optional accessories include the IR printer for on-site documentation of all measurements by date and time, plus the seethrough protective cover for protection against dirt, moisture and impact.
- Simultaneous display of flow and pressure
- 8 units for pressure: psi, inH2O, inch HgkPa, hPa, Pa, mm H2O, mmHg
- 2 units for flow: fpm, m/s
- Built-in density compensation
- Backlit display
- Hold/Max/Min function
- Readings printout with date/time and min./max. values
Technical
Storage temperature -10 to +70 °C
Operating temperature 0 to +60 °C
Battery type 9V battery
Battery life 120 hr
Weight 300g
Dimensions 202 x 57 x 42 mm
Material/Housing ABS
Probe type Pressure sensor integrated
Meas. Range (choose one) 0 to +2 hPa, +2 to 17,5 m/s
0 to +20 hPa, +5 to 55 m/s
0 to +200 hPa, +10 to 100 m/s
0 to +2000 hPa,
Accuracy 0.5% of f.v.
Resolution 0.001 inH2O
pressure meter 520 - differential pressure meter, 0 to 1/10 bar, incl. battery and calibration protocol
The compact hand-held model 520 has a large, easy-to-read display and is easy to operate. The two integrated measurement ranges can be switched over at the press of a button resulting in improved read-off accuracy in the smaller measurement range. Measurements in the negative/positive and differential pressure range can be carried out.
- Two measurement ranges, can be switched over at the press of a button
- With 1/8" hose connection for connection to compressed air system
- Hold button
- Large LCD display
- Low Bat display for battery status
- High accuracy (Class: 0.2%/full-scale)
- Zeroing with potentiometer
Technical Data
Storage temperature -30 to +85 °C
Operating temperature 0 to +60 °C
Battery type 9V block battery
Battery life 250 h
Weight 250 g
Dimensions 152 x 83 x 34 mm
Probe type Piezoresistive pressure sensor
Meas. Range 0 to +10 bar
Resolution 0.001 bar (0 to +1 bar)
0.01 bar (+1 to +10 bar)
Overload ±20 bar