FORGOT YOUR DETAILS?

vibration and acceleration meter V.check-100

Vibration management in accordance with ISO2372

Easy to use
economical
Small
Lightweight
Entry level for vibration monitoring
Also checks switchbox wiring
Measures vibration in velocity or acceleration
a pocket-size, battery operated vibration meter complete with a hand held accelerometer probe, ideal checking the condition of virtually all rotating machinery such as
fans, centrifuges, motors, pumps, conveyors, etc.

V.Check-100 is easy to use and is ideal as an entry level instrument.

V.Check displays absolute vibration levels in either velocity or acceleration units to the ISO10816 standard.
With its simple three button controls, it requires no complicated training in its use
and can be effectively used by any maintenance facilities personnel.

It meets vibration management routines in accordance with ISO2372, and
its portability encourages regular monitoring of vibration levels on machinery
around the factory. This increases the likelihood of a successful condition
monitoring programme being maintained.

V.Check-100 measures vibration as acceleration from 0 to 20g, or velocity from
0 to 50 mm/S (True RMS) by selection of the tactile switches, with level values
displayed on the 3-1/2 digit LCD readout. Its frequency range covers 10 Hz. to
1 kHz. and accuracy is 0.1 mm/S.

connecting cable with magnet instead of spike
The unit also has a built-in accelerometer checking facility and is powered by
a standard PP3 9V battery with a typical life of 30 to 50 hours.

The complete kit includes the meter, a hand-held probe with spike,
interconnecting cable, carrying case and a guide to vibration monitoring.

Options include: Cable - Coiled, armoured and different lengths.
Spike - different lengths of 25, 100 and 200mm.
Adaptors/Studs - threaded or bondable, Quicklock or magnetic mounts.
General Specification
Display 3 1/2 digit LCD
Measuring Ranges
Acceleration: 0 - 20g
Velocity: 0-50 mm/sec
True RMS
Frequency range 10 Hz - 1kHz
Accuracy Vibration +/- 0.1mm/sec
Acceleration +/- 0.1g
Sensor Input for hand held or fixed
Transducers
Power 1 x PP3 Battery supplied
Battery state Low batt. Warning in display
Standard kit Meter, Probe, Cable, Battery,
Instructions, and Carry case

TOP