Portable Categories
see the categories and sub-categories
- Air Velocity
- Chlorine
- Coating Thickness
- Compressed Air
- Concrete Thickness Meter
- Conductivity
- Crane Scales
- Dissolved Oxygen
- Endoscope
- Flue Gas Analysis
- Flue Gas Leakage
- Flow
- Gas Detection
- HACCP
- Humidity
- - Humidity Loggers
- - Measuring Instruments
- - Water Activity
- Light Intensity
- Multi-Function
- Particles
- PH
- Pressure
- Pyranometer
- Reinforcement Bar Locator
- Sound
- Speed/Rotation
- Temperature
- Thickness
- Turbidity
- Vibrations
- Water Leak Detectors
- Wind Speed
608-H1 Large Display Humidity Meter
The economic model 608-H1 hygrometer is ideal for continuous
measurement of humidity, temperature and dew point. Model 608-H2
is more accurate and features an LED alarm that warns if a preset limit is exceeded.
Either model is the ideal solution for a wall mounted or benchtop humidity indicator.
Model 608 is ideal for monitoring computer rooms, museums, plant growth
areas, drug storage & manufacturing.
Features:
• Covers 10 to 95% Humidity
• Large Display
• Sensor not affected by Water
• 3% Accuracy or Better
• Reads Humidity and Temp & Dewpoint
• MAX/MIN Readings
• Wall Mountable
TECHNICAL
LCD, 2 lines
Storage temperature -40 to +70 °C
Operating temperature 0 to +50 °C
Battery type 9V block battery
Battery life 8736 h
Weight 168 g
Dimensions 120 x 89 x 40 mm
Material/Housing ABS
Probe type NTC
Meas. range 0 to +50 °C
Resolution 0.1 °C
Probe type humid. sensor, cap.
Meas. Range +10 to +95 %RH
Resolution 0.1 %RH
model 606-1 : wood & material moisture meter
model 606-1; a wood and material moisture meter, incl. protective cap, batteries and calibration protocol
model 606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials.
Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple
Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
Hold function for easy readout of readings
Display illumination
Self-test function
Protective cap for safe storage
Belt case, wrist strap and calibration protocol included
Technical
Operating temperature -10 to +50 °C
Battery type 2 batteries Type AAA
Battery life 200 h
Weight 90 g
Dimensions 119 x 46 x 25 mm
Probe type Conductive measurement cell
model 606-2 : wood, material moisture & air temperature meter
model 606-2; wood and material moisture meter with built-in moisture measurement and NTC air thermometer, incl. protective cap, batteries and calibration protocol
In addition to material moisture, model 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site
Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
Hold function for easy readout of readings
Display illumination
Self-test function
Protective cap for safe storage
Including wrist strap and belt holder
Measurement of temperature and humidity in ambient air
Air humidity measurement with the long-term stable humidity sensor
Incl. dewpoint calculation and wet bulb
Technical
Operating temperature -10 to +50 °C
Battery type 2 batteries Type AAA
Battery life 130 h
Weight 90 g
Dimensions 119 x 46 x 25 mm
Probe type NTC
Meas. range -10 to +50 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
Probe type Conductive measurement cell
Meas. Range 0 to 90%
Accuracy ±1%
Resolution 0.1
Probe type humid. sensor, cap.
Meas. Range 0 to 100 %RH
Accuracy ±2.5 %RH (5 to 95 %RH)
Resolution 0.1 %RH
model 610 : air humidity & temperature meter
model 610; humidity and temperature measuring instrument incl. protective cap, batteries and calibration protocol
model 610 measures relative air moisture and temperature simultaneously. Dew point calculation and wet bulb as well as Hold function and max./min. display are possible with this instrument.
Features:
- Long-term stable humidity sensor
- +/-2.5 %RH accuracy
- Incl. calibration protocol
- Dewpoint calculation and wet bulb included
- Hold function and max./min. values
- Protective cap for safe storage
- Belt case, wrist strap and calibration protocol included
- Backlit display
- Air moisture and air temperature
TECHNICAL
Storage temperature -40 to +70 °C
Operating temperature -10 to +50 °C
Battery type 2 batteries Type AAA
Battery life 200 h
Weight 90 g
Dimensions 119 x 46 x 25 mm
Temperature Probe type: NTC
Meas. range -10 to +50 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
Humidity Probe type: capacitive sensor
Meas. Range 0 to 100 %RH
Accuracy ±2.5 %RH (5 to 95 %RH)
Resolution 0.1 %RH
model 616 : non-destructive wood & building materials moisture meter
model 616, a wood and material moisture measuring instrument, incl. battery and calibration protocol
The 616 allows fast and non-destructive observation of the material moisture of woods and building materials. This allows the ideal time and place for any destuctive measurement which may be necessary to be determined. The display is in percent by weight in comparison to the dry mass of the material. The 616 makes work easier for all those who need to observe the development of drying in floors, walls and surfaces.
Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete, vertical hole brick and solid brick
Measurement depth up to 5 cm
Handy shape for optimum contact pressure Hold, max., min. function
Illuminated digital display
Characteristics curves were developed in cooperation with the LPI institute
Advantageous for measurements on exotic woods: non-destructive determination of wood moisture
Technical Data
Storage temperature -20 to +70 °C
Operating temperature +5 to +40 °C
Battery type 9V block battery, 6F22
Battery life 60 h
Weight 260 g
Dimensions 70 x 58 x 234 mm
Material/Housing ABS/TPE/Metal
Probe type humid. sensor, cap.
model 625 : relative humidity & temperature measurement
a humidity/temperature measuring instrument, incl. plug-in humidity probe head, battery and calibration protocol
The compact instrument with built-in humidity probe head for measuring air moisture and temperature. The large 2 line display shows humidity, wet bulb temperature or dewpoint as well as temperature. When measuring at hard-to-access points, the humidity probe head can be easily removed and attached to the handle via the probe cable (accessory). Alternatively, the readings can be transmitted wirelessly over wide distances from the probe to the measuring instrument. To do this, the humidity probe head is attached to the radio handle (accessory) and the radio module (accessory) is added to model 625.
- Displays temperature and relative humidity / wet bulb temperature / dewpoint
- Max./min. values
- Hold button to freeze readings
- Display light
- Auto Off function
- An indestructible protection case (optional) against dirt and knocks
- Patented humidity sensor
- 2 year guaranteed long-term stability
Technical
Storage temperature -40 to +85 °C
Operating temperature -20 to +50 °C
Battery type 9V block battery, 6F22
Battery life 70 h (without radio operation)
Weight 195 g
Dimensions 182 x 64 x 40 mm
Material/Housing ABS
Probe type NTC
Meas. range -10 to +60 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
Probe type Type K
Meas. Range -200 to +1370 °C
Resolution 0.1 °C
Probe type humid. sensor, cap.
Meas. Range 0 to +100 %RH
Accuracy ±2.5 %RH (+5 to +95 %RH)
Resolution 0.1 %RH
model 635-1: air & material moisture, pressure dew point, air & material temperature, pressure.
model 635-1, humidity/temperature measuring instrument, with battery and calibration protocol
The instrument for measuring air moisture, material equilibrium moisture and pressure dewpoint in compressed air systems. Up to 3 temperature or humidity probes can be displayed; data transmission is radio-controlled, i.e. wireless. Measurement data can be transmitted by infrared to the printer. It is also possible, during cyclical printing, to print measurement data once every minute, for example. Model 635 immediately displays the dewpoint difference between ambient air and the wall surface when analysing moisture on walls and ceilings. There are precision probes up to -60°C tpd available to inspect pressure dewpoint in compressed air systems. The humidity sensor has proven itself and has outstanding features in terms of precision, long-term stability, temperature resistance and robustness.
- printer for documenting measurement data on site
- Cyclical printing of readings once a minute, for example
- Measures air moisture, material equilibrium moisture, pressure dewpoint
- Radio probes for temperature and humidity
- Protection class IP54
TECHNICAL
Storage temperature -30 to +70 °C
Operating temperature -20 to +50 °C
Battery type Alkali manganese, mignon, Type AA
Battery life 200 h
Weight 428 g
Dimensions 220 x 74 x 46 mm
Material/Housing ABS/TPE/Metal
Probe type Typ T (Cu-CuNi)
Meas. range -200 to +400 °C
Accuracy ±0.3 °C (-60 to +60 °C)
±0.5% of mv (remaining range)
Resolution 0.1 °C
Probe type NTC
Meas. range -40 to +150 °C
Accuracy ±0.2 °C (-25 to +74.9 °C)
±0.4 °C (-40 to -25.1 °C)
±0.4 °C (+75 to +99.9 °C)
±0.5% of mv (remaining range)
Resolution 0.1 °C
Probe type Type K
Meas. Range -200 to +1370 °C
Accuracy ±0.3 °C (-60 to +60 °C)
±(0.2 °C + 0.3% of mv) (remaining range)
Resolution 0.1 °C
Probe type Absolute pressure probe
Meas. Range 0 to 2000 hPa
Resolution 0.1 hPa
Probe type humid. sensor, cap.
Meas. Range 0 to +100 %RH
Resolution 0.1 %RH
635-2 air & material moisture, pressure dew point, air & material temperature, pressure, & logger.
model 635-2, humidity/temperature measuring instrument with readings memory, PC software and USB data transmission cable, with battery and calibration protocol
The instrument for measuring air moisture, material equilibrium moisture and pressure dewpoint in compressed air systems. Moisture characteristics can be recorded in the instrument memory and analysed and displayed in graphics or tables. Up to 3 temperature or humidity probes can be displayed in the 635-2 meter; data transmission is by radio i.e. wireless. Selectable user profiles, i.e. allocation of specific function buttons and menu-guide to an application enable intuitive operation. Material moisture can be displayed immediately on account of the special probe. Characteristics for different materials can be stored in ComSoft and transmitted to the instrument. 635 immediately displays the dewpoint difference between ambient air and the wall surface in the analysis of moisture on walls and ceilings. Precision probes up to -60°C tpd are available to check pressure dewpoint in compressed air systems. The humdity sensor has proven itself and has outstanding features in terms of precision, long-term stability, temperature resistance and robustness.
- Instrument memory for up to 10,000 readings
- PC software for analysis, filing and documentation of measurement data
- Measurement of air moisture, material equilibrium moisture, pressure dew point
- Radio probe for temperature and humidity
- Protection class IP54
- Direct display of material moisture due to freely settable characteristics curves (based on equilibrium humidity)
- Storage of single measurements or measurement series by measurement location
- Fast access to the most important functions via user profiles
- U-value probe connection option
TECHNICAL
Storage temperature -30 to +70 °C
Operating temperature -20 to +50 °C
Battery type Alkali manganese, mignon, Type AA
Battery life 200 h (without radio operation)
Weight 450 g
Dimensions 220 x 74 x 46 mm
Material/Housing ABS/TPE/Metal
Probe type Typ T (Cu-CuNi)
Meas. range -200 to +400 °C
Accuracy ±0.3 °C (-60 to +60 °C)
±(0.2 °C + 0.3% of mv) (remaining range)
Resolution 0.1 °C
Probe type NTC
Meas. range -40 to +150 °C
Accuracy ±0.2 °C (-25 to +74.9 °C)
±0.4 °C (-40 to -25.1 °C)
±0.4 °C (+75 to +99.9 °C)
±0.5% of mv (remaining range)
Resolution 0.1 °C
Probe type Type K
Meas. Range -200 to +1370 °C
Accuracy ±0.3 °C (-60 to +60 °C)
±(0.2 °C + 0.3% of mv) (remaining range)
Resolution 0.1 °C
Probe type Absolute pressure probe
Meas. Range 0 to 2000 hPa
Resolution 0.1 hPa
Probe type humid. sensor, cap.
Meas. Range 0 to +100 %RH
Resolution 0.1 %RH
Moisture detection Meter for surfaces
Looking to add a moisture meter to your tool bag/box?
A fast non-destructive and non invasive meter might be what you are looking for. It works via an electromagnetic sensor pad that comes into contact with the measuring surface
First step in hidden mould prevention
• There are four measurement modes: drywall pattern, masonry pattern, hardwood pattern, cork pattern. Please note that this tool can also be used for other materials.
• Adopting VA full-view inverted display screen, reading data is clearer and operation is more convenient.
• The electromagnetic wave sensor is used to measure objects up to a depth of 20mm, and the area of the object needs to be greater than 40*40mm.
• With℃ and ℉ unit conversion function, it can meet a variety of usage requirements.
• With environmental temperature and humidity detection function: equipped with temperature and humidity sensors to detect environmental temperature and humidity.
• Over-range alarm function: when the drywall and masonry detection value >70%, the softwood, hardwood detection value >17%, the alarm will be activated.
Specifications:
Material: ABS
Measuring range: Hardwood: 0%~35% Cork: 0%~55%
The humidity readings of drywall and masonry are relative values
Power supply: 3*AAA battery (not included)
Detection thickness/area: 20mm / >40 x 40mm
Automatic shutdown: 10 minutes
Working current: 35mA
Working temperature: 0~40℃
Working humidity: 0~70%
Storage environment:-10~50℃ (5%95%RH)
Item size: 132 * 73 * 33mm / 5.2 * 2.9 * 1.3in
Item weight: 150g / 5.3 ounces